Installing Header Shield Compass Dlx Models; Rough In The Electrical Supply, If Needed - Superior Fireplaces DRL2000 Series Installation And Operation Instruction Manual

Innovative Hearth Products
DRL2000 & DRL3500 Series Direct-Vent Gas Fireplaces
Installing Header shield (DRL3500 series models only)
5.
Figure 11 - Installing Header Shield
Screw
f i r e - p a r t s . c o m
Step 1: Remove screw holding standoff to firebox, bend to 4" tall
(as seen above) and attach screw.

Rough in the Electrical Supply, if Needed

6.
As necessary, rough in the fireplace electrical supply per NEC and local codes.
22
Standoffs
Step 2: Install the header shield by sliding it
into the slot in the standoffs.
Header
Shield
Installation
900994-00K, 07/2021
Step 3: Fireboard standoff can be
secured to the capture screw holes.