Table of Contents
Advertisement
Adjusting the brightness
Select Brightness.
#
Set a brightness value.
#
Activating the brightness for zones
Select
Brightness
zones.
#
Activate O or deactivate ª the function.
#
The Display,
Front
and
Rear
separately.
Setting the interior lighting switch-off delay
time
Multimedia system:
Vehicle
÷ Light settings
4
5
Interior light shut-off
5
Set the switch-off delay time.
#
Changing bulbs (only for vehicles with halo‐
gen headlamps)
Notes on changing bulbs
& WARNING Risk of burns from hot com‐
ponent parts whilst replacing a bulb
Bulbs, lamps and plugs can become very hot
zones can be set
during operation.
When replacing a bulb, you could burn your‐
self on these component parts.
Allow the component parts to cool
#
down before replacing the bulb.
Do not use a bulb if it has been dropped or if
R
its glass has been scratched. The bulb may
otherwise explode.
Do not touch the glass bulb with your bare
R
hands.
Protect bulbs from moisture and do not allow
R
bulbs to come into contact with liquids.
Internal use only
Light and sight 135
Overview of the bulbs to be changed
Halogen headlamps
1
Turn signal light: PWY 24 W bulb
2
High beam: H7 55 W bulb
3
Low beam: H7 55 W bulb
Advertisement
Table of Contents
