Table of Contents
Advertisement
Replacing bulbs (vehicles with halogen headlamps)
Halogen headlamps
:
Dipped-beam headlamp: H7 55 W
;
Main-beam headlamp: H7 55 W
Turn signal: W 5 W BV
=
Fitting/removing the cover on the
front wheel arch
You must remove the cover from the front wheel
housing before you can change the front bulbs.
To remove: switch off the lights.
X
Turn the front wheel inwards.
X
Remove securing pin ; using a suitable tool.
X
Slide cover : up and remove it.
X
To fit:insert cover : again and slide it down
X
until it engages.
Insert securing pin ;.
X
Dipped-beam headlamps
Remove the cover in the front wheel arch
X
(
page 127).
Y
Turn housing cover : anti-clockwise and
X
remove it.
Turn bulb holder ; anti-clockwise and pull
X
out.
Pull the bulb out of bulb holder ;.
X
Insert new bulb into bulb holder ;.
X
Insert bulb holder ; and turn it clockwise.
X
Press on housing cover : and turn it to the
X
right.
Replace the cover in the front wheel arch
X
(
page 127).
Y
Main-beam headlamps
Switch off the lights.
X
Open the bonnet.
X
Turn housing cover : anti-clockwise and
X
remove it.
Pull lever = upwards and remove bulb
X
holder ;.
Remove the bulb from bulb holder ;.
X
Insert the new bulb into bulb holder ;.
X
127
Z
Advertisement
Table of Contents
