Table of Contents
Advertisement
140 Light and sight
Fitting the wiper blades
Insert the new wiper blade into the wiper
#
arm in the direction of arrow 1.
Slide catch
2
in the direction of arrow
#
until it engages in the locking position.
Make sure that the wiper blade is seated cor‐
#
rectly.
Fold the wiper arms back onto the wind‐
#
screen.
Switch on the ignition.
#
Press the î button on the combination
#
switch (
page 138).
/
The wiper arms will return to the original
position.
Switch the ignition off.
#
3
Internal use only
Maintenance display
Remove protective film
1
from the mainte‐
#
nance display on the tip of the newly fitted
wiper blades.
When the colour of the maintenance display
changes from black to yellow, the wiper blades
should be replaced.
Advertisement
Table of Contents
