Table of Contents
Advertisement
3
Press the rocker switch up: 6 makes/
accepts a call
Press the rocker switch down: ~ rejects/
ends a call (ends LINGUATRONIC)
Conducting a dialogue with LINGUATRONIC
To start or continue a dialogue: on the
#
multifunction steering wheel, press the £
rocker switch up.
You can say a voice command after an
acoustic signal.
To correct an entry: say the Correction
#
voice command.
To select an entry from the selection list:
#
say the line number or the contents.
To browse the selection list: say the Next
#
or Back voice command.
To interrupt the dialogue: say the Pause
#
voice command.
To cancel the dialogue: say the Cancel
#
voice command.
Operable functions
You can use the LINGUATRONIC voice control
system to operate the following equipment
depending on the features:
Telephone
R
Text messages
R
Navigation
R
Address book
R
Radio
R
Audio (memory card, Media Interface, USB
R
®
and Bluetooth
audio)
TV
R
Vehicle
R
Overview of types of voice command
A distinction is made between the following
voice commands:
Global voice commands can be said at any
R
time and regardless of the current applica‐
tion, e.g. the voice commands Navigate to,
Call or Text message to.
Internal use only
LINGUATRONIC 251
Application-specific voice commands are
R
only available for the active application.
Once Linguatronic is started an autocue is
shown. Apart from the available voice com‐
mands for the application currently active, this
also cites example voice commands for other
applications which are not active. In this way,
you will be familiar more quickly with the availa‐
ble voice commands. The list can be scrolled or
it can be operated by speech or the controller/
touchpad.
Information on the language setting
You can change the language of LINGUATRONIC
via the system language settings. If the set sys‐
tem language is not supported by LINGUA‐
TRONIC, English will be selected.
LINGUATRONIC is available for you in the follow‐
ing languages:
German
R
English
R
French
R
Advertisement
Table of Contents
