Table of Contents
Advertisement
1
ISOFIX mounting bracket
2
i‑Size mounting bracket
Before every journey, make sure that the ISOFIX
child restraint system or the i‑Size child restraint
system is engaged correctly in both mounting
brackets in the vehicle.
* NOTE Damage to the seat belt for the
centre seat during installation of the
child restraint system
Make sure that the seat belt is not trap‐
#
ped.
Attach the ISOFIX or i‑Size child restraint sys‐
#
tem to both mounting brackets in the vehicle.
Securing Top Tether
& WARNING Risk of injury or death if the
rear seat backrests are not locked after
Top Tether belts are fitted
The rear seat backrests may fold forwards
when you are driving.
As a result, child restraint systems will no
longer be able to perform their intended pro‐
tective function. This may also cause addi‐
tional injuries.
Always lock rear seat backrests after
#
fitting Top Tether belts.
Internal use only
Occupant safety
Observe the lock verification indicator.
#
If the left and right seat backrests are not
engaged and locked in place, this will be shown
on the multifunction display on the instrument
cluster.
If the centre seat backrest is not engaged and
locked in place, the red lock verification indica‐
tor will be visible.
¯ If the child restraint system is equipped
with a Top Tether belt:
The risk of injury may be reduced by Top
Tether. The Top Tether belt enables an
additional connection between the child
restraint system attached with ISOFIX or
i‑Size and the vehicle.
63
Advertisement
Table of Contents
