Table of Contents
Advertisement
136 Light and sight
Tail lamps
1
Turn signal light: PY 21 W bulb
2
Reversing light: W 16 W bulb
Changing the front bulbs (vehicles with halo‐
gen headlamps)
Fitting/removing the cover in the front
wheel arch
Requirements:
The lighting system is switched off.
R
The appropriate front wheel is turned
R
inwards.
Internal use only
To remove: using a suitable object, turn the
#
two mounts
1
of the cover
clockwise direction as far as they will go.
Remove the unlocked cover
#
wheel arch liner by pulling it upwards.
To fit: insert
cover2
at bottom of the wheel
#
arch liner.
Using a suitable object, turn the two mounts
#
1
of the cover
2
in clockwise direction as
far as they will go.
Replacing bulbs in the halogen headlamp
Requirements:
The lighting system is switched off.
Low beam/high beam
A H7 55 W light bulb is available.
R
The bonnet is open.
R
Turn signal lights:
A PWY 24 W light bulb is available.
R
The cover in the front wheel arch has been
R
removed.
2
in an anti-
2
from the
Advertisement
Table of Contents
