Table of Contents
Advertisement
5
Rebound stage, basic
setting, rear
76
Position 4 (standard setting
with rider 187 lbs (85 kg))
Position 7 (sport-oriented set-
ting with rider 187 lbs (85 kg))
Factory settings on the
rear wheel
z
Use following specification data
to adjust to factory settings.
Factory settings for re-
bound at rear
Position 4
Displaying damping with
DDC
with Dynamic Damping Control
OE
(DDC)
Switch on ignition (
Press button 1 briefly to
display current adjustment.
The damping is displayed in the
multifunction display in area 1,
44).
and the load is indicated in
area 2.
The display automatically dis-
appears again after a short
time.
Adjusting damping with
DDC
with Dynamic Damping Control
(DDC)
OE
Switch on ignition (
Press button 1 briefly to
display current adjustment.
To set the damping rate:
Repeat pressing button 1
briefly until desired setting is
displayed.
44).
Advertisement
Table of Contents
