Table of Contents
Advertisement
9
144
Remove screw 1 and take
wheel speed sensor out of
bore.
Mask off areas of wheel rim
z
that could be scratched in the
process of removing the brake
calipers.
ATTENTION
Unintentional pressing to-
gether of brake pads
Component damage when
mounting the brake caliper or
when pressing the brake pads
apart
Do not actuate the brakes with
the brake caliper removed.
Remove screws 1 of brake
calipers on left and right.
Push brake pads 1 slightly
apart by turning the brake
caliper 2 back and forth against
the brake rotor 3.
Carefully pull brake calipers
back and outward to remove
them from brake rotors.
Raise motorcycle, preferably
with a BMW Motorrad rear-
wheel stand.
Mounting rear-wheel stand
(
134).
Raise front of motorcy-
cle, preferably using a
BMW Motorrad front wheel
Advertisement
Table of Contents
