Table of Contents
Advertisement
9
146
Lift front wheel and install
quick-release axle 1 to
appropriate torque.
Quick-release axle in
z
threaded bush
37 lb/ft (50 Nm)
Tighten right axle clamping
screws 2 to specified tight-
ening torque.
Clamping screw in axle
adapter
Tightening sequence: Tighten
the screws 6 times, alternating
between one and the other
each time
14 lb/ft (19 Nm)
Remove front-wheel stand and
rear-wheel stand.
Set brake caliper onto brake
disc.
Set brake caliper 1 on left and
position cable routing 2.
Install screws 3 with appropri-
ate torque.
Radial brake calipers on
the axle adapter
28 lb/ft (38 Nm)
Fasten cable for wheel speed
sensor in bracket arrow.
Advertisement
Table of Contents
