Table of Contents
Advertisement
stand, continuing until the
wheel rotates freely.
Mounting front-wheel stand
(
133).
ATTENTION
Incorrectly aligned threaded
bush in the front suspension
Damage to the wheel speed sen-
sor. ABS malfunction
The left-hand wheel axle
clamping bolts lock the
threaded support sleeve in
position and must not be
loosened or removed.
Unscrew axle clamping bolts 1
on right side.
Remove quick-release axle 2
while supporting wheel.
Roll front wheel forward to re-
move it.
Install front wheel
WARNING
Use of a wheel which does
not comply with series speci-
fications
Malfunctions during control inter-
ventions by ABS and ASC/DTC
Please see the information on
the effect of wheel sizes on
the ABS and ASC/DTC chassis
control systems at the begin-
ning of this chapter.
ATTENTION
Tightening of screwed con-
nections with incorrect tight-
ening torque
Damage or loosening of screwed
connections
Always have the tightening
torques checked by a spe-
cialized workshop, preferably
an authorized BMW Motorrad
retailer.
ATTENTION
Front wheel installation op-
posite the running direction
Accident hazard
Observe running direction ar-
rows on tire or rim.
Roll front wheel into front
suspension.
9
145
z
Advertisement
Table of Contents
