Table of Contents
Advertisement
7
110
Press and hold the starter but-
ton 1 until the display changes.
Check display.
z
L-CON and the still permitted
number of starts 1 with Launch-
control are shown in the display.
Start possible with Launch Con-
trol.
Perform start as described be-
low.
If no start with Launch-control is
currently possible, the number 0
is displayed with an exclamation
mark 1 added.
Let the clutch cool down.
Cooling phase of the
clutch
Approx. 3 min (with the en-
gine running)
Cooling phase of the
clutch
Approx. 20 min (with the en-
gine stopped)
Perform start as usual, open
throttle grip at least to such
an extent that speed limiting is
reached.
Open throttle grip completely
after clutch engagement.
The DTC warning light
lights up. The DTC sys-
tem has been switched off.
Shiftpoint light lights up.
Launchcontrol controls the
ideal torque on the rear wheel
and maintains a constant
engine speed up to approx.
60 km/h.
Due to the full-throttle posi-
tion of the throttle grip, the en-
Advertisement
Table of Contents
