Table of Contents
Advertisement
Install screws 4 with wash-
7
ers 3.
Number-plate carrier to
114
rear frame
4 lb/ft (5 Nm)
with anti-theft alarm system
OE
(DWA)
z
Install bracket 3 for the anti-
theft alarm system.
Install expanding rivet 2.
Fasten plug connection 1 for
license-plate carrier.
Insert anti-theft alarm sys-
tem 2; attach in bracket 3.
Install screw 4.
Connect plug connection 1 for
anti-theft alarm system.
Work the plug connection 1
with the cable through the
lower rear section 2.
Connect plug connection 1,
position and secure with cable
strap (arrow).
NOTICE
If the lamp defect warning mes-
sage for racetrack use is sup-
pressed in the display, this must
be activated in the SETUP MENU
under the EQIP WARN LAMP
function before the motorcycle
is put into operation in road traf-
fic .
Advertisement
Table of Contents
