Table of Contents
Advertisement
Set parameter
7
108
Press and hold button 2 until
displayed parameter begins to
flash.
Press button 1 or button 2 re-
peatedly until desired value is
z
displayed.
If desired value is displayed:
Press and hold button 2 un-
til displayed value no longer
flashes.
The value has been saved.
Exit settings
To exit SETUP MENU, press and
hold button 1.
A value which is still flashing
will not be saved.
As an alternative, press but-
ton 1 or button 2 repeatedly
until SETUP MENU EXIT is dis-
played.
When SETUP MENU EXIT is
displayed:
Press and hold button 2 to exit
SETUP MENU.
Advertisement
Table of Contents
