Menu Overview - Furuno CH-300 Operator's Manual

1.10

Menu Overview

The menu, consisting of six menus, mostly contains items which once preset do not require
frequent adjustment. Below is the procedure for basic menu operation.
1. Press the MENU key to open the menu.
Note: Either PRESET (default setting) or SHORT-CUT appears between ES and SYS at the
top of the screen depending on the setting of CUSTOM KEY on the SYSTEM SETTING 1
menu, and they set the function of the custom keys [1], [2], [3]. For further details see pages
5-3 through 5-7.)
MENU
DELETING TRACK
MIX MODE
WHITE MARKER
SIG LEVEL
COLOR
BKGD COLOR
: SELECT
2. The last-used menu is displayed. To choose a different menu, press ▲ to choose
MENU and then press ◄ or ► to choose menu desired.
3. Press ▲ or ▼ to choose menu item desired. At the bottom of the screen menu help is
provided.
4. Press ► to open the corresponding dialog box. The example below shows the dialog
box for DELETING TRACK, which is in the COM2 menu.
DELETING TRACK
NO YES
Dialog box for deleting track
5. Press ◄ or ► to choose option desired. If the option requires input of numeric data, use
◄ or ► to lower or raise the figure, respectively.
6. Press ▲ or ▼ to return to the menu, or press the MENU key to register your selection
and close the menu.
COM1 COM2 HORZ VERT
NO
STANDARD
OFF
OFF
16
2
: CHANGE MENU: END
COM2 menu
1. OPERATIONAL OVERVIEW
ES PRESET SYS
1-15