Table of Contents
Advertisement
8
Sewing
Following conditions must be fulfi lled for sewing:
●
All safety equipment must be attached, see Chapter
●
The machine must be set up and commissioned in accordance with the set-up instruc-
tions.
●
The setting up work must have been carried out, see Chapter
8
Calling up / carry out the sewing operation
.01
After the user's log-in, following steps must be carried out:
●
Call up the seam program selection function.
●
Select the desired program from the list.
●
Call up the production function.
●
Insert the material.
●
Start the production process by operating the pedal.
The machine may only be operated by appropriately trained personnel! The
operating personnel must ensure that only authorised persons are in the danger
zone of the machine!
As an alternative to the manual seam program selection, the appropriate seam
program can also be selected with the hand-held scanner, if a corresponding
barcode is available.
1.06 Danger warnings.
7 Setting up.
Industrial
20.06.2006
20.06.2006
23.07.2006
24.07.2006
Sewing
25
Advertisement
Table of Contents
