Table of Contents
Advertisement
●
Call up the Program Header function.
Artikel 2b
4
Material
5
6
●
If necessary, enter/change the program number, process-ID and comment.
●
Enter the value for the stitch length correction dependent on the material.
●
Enter/change the value for the second stitch length (can be called up with the appropriate
key on the machine head).
●
Enter/change the value for the second stroke (can be called up with the appropriate key
on the machine head).
●
Enter top thread and bobbin thread ID in input fi eld
activate this function later in input fi eld 4.
Control will then only accept sewing material with that ID.
or
enter @ @ @ in input fi eld 3.
The control will not carry out any adjustments, IDs will only be logged.
●
Select the data for printing the end label (value "
value "10" = print label every tenth time).
Industrial
1
X
1
X
0
1
@ @ @
0
0
3, or scan in via hand scanner to
1" = print label each time;
Input
1
2
3
4
9
Advertisement
Table of Contents
