7
Winding the bobbin thread, regulating the winder tension
.05
(PFAFF 3745 PREMIUM)
Fig. 7 -05
The requirement for the following steps is that the machine is in the production mode, see
Chapter 9 Sewing.
●
Select the "winding" function.
●
Pull the thread from the reel stand through guide
then behind thread clamp 3.
●
Break off the thread in the thread clamp. The thread is then secured.
●
Set the empty bobbin
●
Press up lever
●
Enter or scan in the bobbin number.
If no thread classifi cation is required, enter the value "0".
●
Remove the full bobbin
●
The tension of the thread on bobbin
●
The thread amount on bobbin
3
7
4 on the bobbin winder spindle 5.
6 to switch on the bobbin winder.
After the bobbin number has been entered, the bobbin winder starts
automatically and stops again, when bobbin 4 has been fi lled suffi ciently.
4 and break off the thread in the thread clamp.
4 can be adjusted with screw 7.
2
4
5
6
1 into bobbin winder tension unit 2 and
4 can be set on the bobbin winder tension unit 2.
Setting up
1
21