Table of Contents
Advertisement
1
Defi ning options and interfaces
.10
In this function, options like label printer, thread type, material type, service, and day coun-
ter, as well as control interfaces can be defi ned.
●
Log on as administrator or setter.
●
Select function "Tools".
●
Call up function "Options and interfaces".
1
2
7
●
Defi ne relevant threads by inputting their barcode, thread thickness, thread type, and
thread manufacturer in the entry window 1 for top and bobbin threads.
●
Input relevant material by entering the barcode, material number, and material type in the
entry window 2.
●
Input label printer in window
●
Defi ne print process for protocol printing in window
●
Input number of stitches until needle change in window
(If a specifi ed limit is reached, the error message "Change needle" is displayed, and the cur-
rent counter value is reset to 0.)
●
A daily or weekly parts counter can be specifi ed in window
●
The COM interfaces must be set as seen in fi gure
●
Machines with mechanical bobbin winder and mechanical thread tensioning (
PLUS + 3745 PLUS) can be selected in window 8).
●
Operation-specifi c data is entered in window
If no thread and material are selected, any type of thread or material can be
used.
If material and thread were selected, only the selected items can be used.
3.
Com nr.
Top thread sensor
Com nr.
Bobbin thread sensor
Com nr.
Label scanner
Com nr.
Control
The programme will have to be restarted after any changes!
4.
5.
6.
7.
9.
5
6
4
3
Input
3
4
5
6
8
9
PFAFF 3741
25
Advertisement
Table of Contents
