Register a PredictPulse Subscription
Figure 20. Date/Time Selection
8.
Run the PredictPulse Activation wizard from your
NOTE
NOTE
9.
If any changes were made to the connectivity card after activating PredictPulse, reset the card by clicking
Reboot Now at the bottom of the Network page (see
to reboot.
18
Eaton PXGMS Card Quick Start Instructions P-164000208—Rev 06
Refer to the
Eaton PredictPulse Quick Start Guide
The registration process to activate the unit for PredictPulse may take 15 minutes or
more. To ensure the PredictPulse activation was successful, call the Eaton Software and
Connectivity team at 800-843-9433, option 2, option 5 for assistance.
https://PredictPulseapp.eaton.com
for more information.
Figure
21). The card will take two to three minutes
account.