Table of Contents
Advertisement
4.
In the Recipient Settings section of the E-Mail page, verify that the checkboxes for recipient
monitor@v2.pwmonitor.com are setup as shown in
shown. If using an Eaton Wireless Modem, ensure no non-Eaton addresses are listed. Click Apply after
making any changes.
Set the Days between periodic status emails to 1 and enter a time of the day in the appropriate boxes.
5.
Click Configure below the SMTP server IP/hostname to display the E-Mail Event Trigger Configuration
page (see
Figure
19). Verify that some or all alarms are checked. At least one alarm must be selected for
PredictPulse to receive all pertinent data. Scroll to the bottom of the page and click Apply after making any
changes.
Figure 19. E-Mail Event Trigger Configuration
6.
Click Test Event Email at the top of the page to send a test e-mail to all recipients in the recipient list. A
progress message will appear. Each recipient should receive a test email within one to two minutes. If no
test email is received, verify the Network settings from the Configuration menu and/or verify external
relay is enabled for the card's IP.
7.
Navigate to the Date/Time page from the Configuration menu (see
a.
If an NTP server is available, verify Synchronize with NTP server(s) is checked, then enter the
time server name or IP address.
b.
If no time server is available, but the connectivity card has internet access, use one of the public
time servers from pool.ntp.org.
c.
If using the wireless modem provided by Eaton, use 192.168.1.1 for the NTP server IP address #1.
(Ensure the modem is configured for NTP.)
d.
If an NTP server is not available or the correct time is not displayed in the black banner at the top
of the card GUI within two minutes of setting the NTP, choose Set date/time from PC clock.
e.
Ensure the correct time zone under Time zone for logs, email, and connected device is selected.
f.
Click Apply after making any changes.
Figure
17. If not, add this recipient and setup as
Eaton PXGMS Card Quick Start Instructions P-164000208—Rev 06
Register a PredictPulse Subscription
Figure
20).
17
Advertisement
Table of Contents
