Table of Contents
Advertisement
Install the USB Driver Software
I I n n s s t t a a l l l l t t h h e e U U S S B B D D r r i i v v e e r r S S o o f f t t w w a a r r e e
The steps you use to install the driver software depend on your operating system (OS). This procedure provides
instructions for installing driver software on a Windows OS.
NOTE
To install the driver from the Device Manager:
1.
Click Start in the Start bar. Type Device in the search box.
2.
Select Device Manager from the list above the search box. The Device Manager displays (see
Figure 5. Device Manager
3.
Expand the Network adapters and Ports (COM & LPT) sections as shown in
•
Look for a USB Serial Device with a COM port designation (COM4 in the example shown in
•
Unplug the USB connection to the card to verify the correct COM device in the Device Manager
4.
Right-click the USB Serial Device (COM#) to display the menu and select Update Driver Software.
•
If a pop-up message displays, "The best driver is already installed," click Close and go to
•
Otherwise, go to
5.
Select Browse my computer for driver software (see
6
Eaton PXGMS Card Quick Start Instructions P-164000208—Rev 06
You can use either the Device Manager path or the Devices and Printers path to browse
for the driver software and install it. This procedure uses the Device Manager.
Step
5.
Figure
Figure
6). Click Next. The next page displays.
Figure
5).
5.
Figure
5)
Step
10.
Advertisement
Table of Contents
