Cleaning Your Machine; Cleaning The Exterior; Cleaning The Scanning Area; Cleaning The Roller - Canon MultiPASS F20 Basic Manual

Cleaning your machine

This section describes the necessary cleaning procedures for your machine.
CAUTION
• Be sure to turn off the power and disconnect the power cord before cleaning the machine.
• Do not use tissue paper, paper towels, or similar materials for cleaning; they can stick to the
components or generate static charges. Use a soft cloth to avoid scratching the components.
• Never use volatile liquids such as thinners, benzene, acetone, or any other chemical cleaner to
clean the interior of the machine; these can damage the machine's components.

Cleaning the exterior

Wipe the machine's exterior with a clean, soft, lint-free cloth moistened with water or diluted
dishwashing liquid.

Cleaning the scanning area

Wipe the platen glass A and white area B with a
clean, soft, lint-free cloth moistened with water,
then wipe with a clean, soft, dry, lint-free cloth.

Cleaning the roller

Clean the roller when envelopes do not feed correctly.
Follow this procedure to perform roller cleaning:
1
Remove any print media from the multi-purpose tray.
2
Press [Menu] repeatedly until <MAINTENANCE> is displayed.
Ex:
7 . M A I N T E N A N C E
N O Z Z L E C H E C K
3
Use [2] or [3] to select <ROLLER CLEANING>.
4
Press [Set].
5
When cleaning has finished, repeat this procedure twice more. Then
load letter- or A4-size plain paper and repeat this procedure a further
three times from step 2.
Chapter 9
A B
9-9
Maintenance
9