Loading Print Media; Loading Paper; Loading Envelopes - Canon MultiPASS F20 Basic Manual

Loading print media

Loading paper

Follow this procedure to load paper in the multi-purpose tray:
1
Open the multi-purpose tray
tray extension w.
2
Place a stack of paper (print side up)
in the multi-purpose tray q and
adjust the paper guide A to the
width of the stack w.
• Make sure the stack does not exceed the
paper limit mark B.

Loading envelopes

Follow this procedure to load envelopes in the multi-purpose tray:
1
Make sure the paper thickness lever is
set to the right.
• For details, see p. 3-6.
2
Open the multi-purpose tray, then the
tray extension.
3
Prepare the envelopes for loading:
Press down firmly on the edges of the
envelopes to make the folds crisp. Also,
press firmly on the area that corresponds
to the edges of the back flap.
3-8
Print media handling
q, then the
q
w
w
A
B
q
Chapter 3