4: The Multipass Suite Software; Basic Operation; Installing The Software; System Requirements - Canon MultiPASS F20 Basic Manual

Chapter
4
The MultiPASS Suite software

Basic operation

Installing the software

If you have not already installed the software as explained in the Setup Sheet, please do so
now. For instructions, see the

System requirements

To successfully install and operate the MultiPASS Suite, your system must meet the following
requirements:
• CD-ROM drive, or access to one over a network connection
• 256-color SVGA monitor or greater
• Microsoft Internet Explorer version 4.01 or later
• Client for Microsoft Networks (Windows 98/Me only)
• 60 MB of available hard disk space (150 MB recommended)
# / 8
• USB cable 16
Microsoft Windows 98
• IBM or compatible computer with a Pentium® 90 processor or higher
• 32 MB of RAM (64 MB or more recommended)
Windows Me
• IBM or compatible computer with a Pentium® 150 processor or higher
• 32 MB of RAM (64 MB or more recommended)
Windows 2000
• IBM or compatible computer with a Pentium® 133 processor or higher
• 64 MB of RAM (128 MB or more recommended)
Windows XP
• IBM or compatible computer with a Pentium® 233 processor (Pentium® 300 processor or
higher recommended)
• 64 MB of RAM (128 MB or more recommended)
Chapter 4
Setup Sheet or the Software Guide.
ft. (5 m) or shorter
The MultiPASS Suite software—Basic operation
4
4-1