11: Machine Settings; Accessing The Machine Settings - Canon MultiPASS F20 Basic Manual

Chapter
11

Accessing the machine settings

Follow this procedure to change a setting:
1
Refer to the lists on the following pages to find the setting you want to change.
2
If there is a reference for the
setting A, refer to that page for
details. If not, at the top of the list,
note under which function key B
and menu C the setting is located.
3
Press [Copy], [Scan], or [Photo Print]
depending under which function
key B the setting is located.
4
Press [Menu] repeatedly until the
menu C under which the setting is
located is displayed.
5
Use [2] or [3] to select the setting you want.
6
Press [Set].
7
Follow these guidelines to scroll through and register settings:
• Use [2] or [3] to scroll through settings.
• To register a setting or access sub-settings, press [Set].
• If necessary, to return to standby mode, press [Stop/Reset].
NOTE
• < > in the LCD indicates the current setting.
Chapter 11
Machine settings
Example:
C
Menu: SPECIAL COPY
Function key: [Copy]
Name Description
2 on 1 Copies two pages on one page (letter- or A4-size only).
Copies without any borders (letter, A4-, or 4" × 6"-size
BORDERLESS COPY
only).
IMAGE REPEAT Prints multiple copies of an image on a single sheet.
AUTO Automatically selects the number of repetitions.
MANUAL Manually selects the number or repetitions.
VERTICAL Select the number of vertical repetitions.
HORIZONTAL Select the number of horizontal repetitions.
MIRROR IMAGE Prints a mirror image of the original.
ENTIRE IMAGE Prints the original image to fit the selected paper
size.
Machine settings
B A
Setting Details
— p. 6-5
— p. 6-6
— p. 6-7
—
1/2/3/4
1/2/3/4
— p. 6-9
— p. 6-10
11-1
11