Inserting/Removing A Memory Card; Inserting A Memory Card; Removing A Memory Card - Canon MultiPASS F20 Basic Manual

Inserting/removing a memory card

Inserting a memory card

To use a memory card, you will need to insert it into a PC card adapter before inserting it in
the card slot. Do not attempt to insert it into the card slot without a PC card adapter.
1
Make sure the machine is on.
• If not, press [ON/OFF].
2
Insert the memory card into the PC card
adapter.
3
Insert the PC card adapter all the way
into the card slot on the front of the
operation panel.
• The indicator light
in photo print mode or when writing from the
computer.
NOTE
• If the memory card cannot be read, check that:
– the PC card adapter containing the memory card is inserted all the way into the card slot.
– the PC card adapter containing the memory card was not removed while being read.
– you are using a compatible memory card.
– your memory card contains photographs.

Removing a memory card

CAUTION
• Do not remove the memory card or turn off the machine when the indicator light is blinking as
this may damage the data in the memory card.
1
Check that the indicator light is not
blinking q, then press [ON/OFF]
to turn the machine off w.
• If you have been writing to a memory card
in Windows 2000, wait ten seconds before
turning off the machine.
8-2
Photo printing from a memory card
A turns on when the machine is
A
w
q
Chapter 8