Care And Maintenance - Britax Diplomat P321900 User Manual

Cover Removal
WARNING!
buckle tongues from the harness. They cannot be reattached after
removal. If reassembled incorrectly, the child seat may not perform as
intended.
1 Remove the infant body pillow.
2 Loosen the harness by lifting the harness adjuster
lever while pulling both shoulder straps forward
as far as possible.
3 Unhook the shoulder straps from the harness
yoke on the rear of the child seat (Fig. E).
4 Pull the upper harness straps through the head
restraint and cover to the front of the child seat.
5 Remove the buckle and belly pad. See page 35.
6 Remove the head restraint portion of the cover. Be careful not to
damage the energy-absorbing foam.
7 Remove the energy-absorbing foam from the head restraint and set
aside.
8 Gently remove the upper portion of the cover by pulling it around the
head restraint to the front.
9 Pull the lower harness straps, buckle tongues, HUGS
chest clip through the lower slots in cover.
10 Remove the entire cover from the child seat.
Do not take apart the harness. Never remove the

Care and Maintenance

e
chest pads, and
™
33