Storing the LCS Connectors
When the LCS connectors are not in use, lift the
child seat cover to access the LCS storage slots (Fig.
E). Fold each end of the LCS adjuster and connector,
then slide each set into the adjacent slot.
NOTE: Child seats are shipped from Britax with
LCS connectors in the storage slots.
Recline Adjustment
Pull the recline handle (Fig. F) then slide the child
seat shell into the desired position. Release the
recline handle, then verify the child seat has locked
into position.
WARNING!
•
This child seat must be in the recline position
when installed rear-facing.
•
This child seat must be in the upright position
when installed forward-facing.
NOTE: It will be necessary to loosen the tether,
the vehicle seat belt, and/or the LCS strap before
adjusting the recline position. The tether, the vehicle seat belt, and/or
the LCS strap must be properly re-tightened after adjusting the recline
position.
Infant Body Pillow
The Infant Body Pillow is designed to provide better fit and comfort for
infants using this child seat. For additional side support, fold the side flaps
inward (Fig. G).
NOTE: Remove the Infant Body Pillow after child can sit comfortably in
the child seat without additional support.
Child Seat Functions
e
f
G
29