Tether Connector Strap
WARNING!
facing tether installation.
Because every vehicle model is different,
sometimes you cannot find a location to
properly anchor the tether. Use the tether
connector strap to assist in creating an anchor
point (Fig. D).
1
Find a fixed vehicle anchor point that is
bolted to the floor.
•
If you cannot find an acceptable location to
create an anchor point, contact the vehicle
manufacturer to identify a suitable tether
connection point.
2
Route the strap around the fixed vehicle
anchor point.
3
Take the metal D-ring and thread it
through the webbing loop on the other
end of the strap (Fig. D).
4
Pull the metal D-ring all the way through
until the strap is tight.
5
Use the D-ring as an attachment point for
the hook on the tether strap.
NOTE: Store the tether connector strap in
the tether pouch when not in use.
Installation : Versa-Tether
Only use tether connector strap for rear-
D
27