Table of Contents
Advertisement
CARE & MAINTENANCE
HEAT AND VENTILATION
Ensure babies and toddlers are adequately shaded from direct sunlight through side or rear windows.
Check the car is ventilated by opening windows or using the car's ventilation system taking in external air.
Recirculation setting is not suitable for providing ventilation.
Never leave babies or toddlers in a stationary car in the sun because of the risk of heat exhaustion.
REGULAR CARE OF THIS RESTRAINT:
Please check the following items regularly to ensure the safety of your child:
A. Check the webbing of the straps for fraying,
B. Check there are no cracks in moulding,
C. Check the harness adjuster is operating and is clamping the webbing,
D. Ensure the buckle is free of fluff, liquid or other matter that may enter the buckle slots. Clean the buckle
if it is sluggish to engage. See next page.
E. If any part of the restraint is cracked or broken, seek repair immediately - contact Britax Customer
Service 1300 303 330
CLEANING CAR SEAT
Use only mild soap and water to clean all metal and plastic parts of the restraint. Do not use chemicals or
cleaning agents.
HARDWARE: Use only mild soap to clean all metal and plastic parts of your child's restraint, using a
damp sponge or cloth. Do not use chemicals or cleaning agents. Do not try and place any hardware into a
washing machine.
STRAPS/HARNESS: We recommend spot cleaning straps and harness with a damp sponge or cloth using
only cold or warm water. Never place any straps or harness into a washing machine or tumble dryer.
78
Instructions for Installation & Use
Advertisement
Table of Contents
