How To Adjust Harness Height; Securing Your Child - Britax Diplomat P321900 User Manual

How to Adjust Harness Height

I
MPORTANT: See Important Harness Adjustments
on pages 6–7 for instructions on proper harness fit
based on your child's height and weight.
1 Loosen the harness by lifting the harness adjuster
lever while pulling the harness straps forward as
far as possible (Fig. F).
2 Rotate the head restraint adjustment knob on
either side of the child seat to raise or lower the
head restraint and harness (Fig. G).
NOTE: DO NOT force the head restraint adjustment
knob in either direction. If the knob is difficult to
turn, the head restraint may be at maximum or
minimum height, the harness may be tight, or the
child's weight is pressing against the head restraint
cover.

Securing Your Child

1 Loosen the harness by pressing the adjuster
button located on the front of the child seat, then
pull the shoulder straps forward (Fig. F).
2 Release the chest clip by squeezing the tabs and
sliding pieces apart (Fig. H).
3 Unfasten the harness buckle by pressing
the release button and sliding the tongues out
(Fig. E).
4 Move the harness straps to the side of the child
seat. Use the harness holder located on the straps
and side of the cover to aid in holding the straps.
Child Seat Functions
e
f
G
H
31