Child Seat Functions; Adjusting Harness And Head Restraint Height - Britax GROW WITH YOU CLICKTIGHT User Manual

BRITAX Child Safety, Inc.
NOTE: Ensure that the
belt passes under armrest
along belt guide on buckle
side.
5. Remove slack from the
vehicle belt.
Before traveling, verify that the:
9 Child restraint is in a vehicle seat that has a lap-
shoulder belt.
9 Vehicle belt is not twisted.
9 Buckle does not rest on red belt guide.
9 Shoulder part of vehicle belt is routed through the
shoulder belt guide above the child's shoulder, lies
across the center of the child's chest and does not
contact the child's neck.
9 Lap part of the vehicle belt should be worn under
the armrests and rest low on the child's upper
thighs.
20
GROW WITH YOU CLICKTIGHT / PLUS User Guide

Child Seat Functions

Adjusting Harness and Head Restraint Height

Make all adjustments for the fit of your child
IMPORTANT:
before using the child seat. Place the child seat on the floor
and have your child sit in the seat. Follow the instructions on
the following pages to make the proper adjustments to the
harness, buckle, and head restraint.
1. Loosen the harness if
necessary.
a. Press the release lever.
b. Pull both harness
straps forward.
2. Lift and slide the harness
height adjuster into the
desired position.
NOTE: Ensure the head
restraint has locked into
position.
In Harness Mode,
IMPORTANT:
the harness height adjuster
also adjusts the height for the
head restraint. Always adjust
the harness straps to the
closest position at or above
your child's shoulders.
In Booster Mode
IMPORTANT:
adjust the head restraint so
that the vehicle shoulder belt
lays straight across the center
of the child's chest and above
the child's shoulder. The vehicle
shoulder belt should be routed
through the red shoulder belt
guide without contacting the
child's neck.
Above
Shoulder Level
Shoulder level
Below
Shoulder Level
21