Hardware Installation - MSI 611BF User Manual

 PCI Bus Master IDE Controller and ULTRA DMA 33/66 : On-board PCI Bus Master IDE
controller with two connectors that supports four IDE devices in two channels, provides faster
data transfer rates, and supports Enhanced IDE devices such as Tape Backup, CD-ROM
、ZIP 、LS-120 Drives. This controller also supports PIO Modes and Bus Master IDE DMA
33/66 MB/S.
 ACPI supporting for OS Directed Power Management
Keyboard /PS/2 Mouse Power On: When use ATX power supply and JP6 1-2 closed,
choose power on function by password in BIOS , can control power supply on by keyboard
instead of power button .
Ring-in Wake up: When Ring-In the system can wake up from SMI Mode.
Ring-in Power On: When Ring-In the system can power on automatic by this function.
Wake on LAN: When Wake on LAN the system can power on automatic by this function.
RTC Power On: Enabled RTC Power On function, you can setting RTC alarm to power on
the system at the time length you setting .
Power Button: Press the button will place the system power on/off.
Support Software Power OFF Function.
 Power Support: Efficient PWM switching power instead of traditional Linear Voltage
Regulator to prevent power component from being burned-out.
 Meets PC99 Requirements.
 Optional IRDA and PS/2: This motherboard supports an dedicated 16C550 standard
UART,supporting infrared communication module for wireless interface and PS/2 mouse
cable set.
 USB Port Connector: This motherboard supports two USB port connectors for USB devices.
 PC Health Monitoring : To track PC CPU temperature, system voltage and fan speed.
When current temperature over warning temperature system will have alarm to warning.
 AC recovery ON/OFF control by BIOS
 Baby AT Form Factor: Dimensions 22cm x 22cm.

Hardware Installation

Chapter 2
2