Keyboard Password/Hot-Key/Ps/2 Mouse Power On - MSI 611BF User Manual

3. After re-start your computer; just simply click NEXT to choose Windows default driver.
Windows 98：
1. Install X：\INTEL810\INF\INFINST\SETUP.EXE and follow on screen instruction.
2. After re-start your computer; at prompt of asking for ICHxIDE.CAT, please points to C:\WINDOWS\
CATROOT , otherwise just simply click NEXT to choose Windows default driver.
Please follow on screen instruction to complete your installation.
Sound Driver (For Avance Audio Codec only)
1. Windows 95：Run X：\CODEC\ALC200\WIN95\SETUP.EXE
2. Windows 98/98SE：Run X：\CODEC\ALC200\WIN98\SETUP.EXE
3. Windows NT 4.0：Run X：\CODEC\ALC200\WINNT\SETUP.EXE
4. Windows 2000：Run X：\CODEC\ALC200\WIN2000\SETUP.EXE
Sound Driver (For Crystal Audio Codec only)
1. Windows 95：Run X：\CODEC\CRYSTAL\WIN95\SETUP.EXE
2. Windows 98/98SE：Run X：\CODEC\CRYSTAL\WIN98\SETUP.EXE
3. Windows NT 4.0：Run X：\CODEC\CRYSTAL\WINNT\SETUP.EXE
4. Windows 2000：Run X：\CODEC\CRYSTAL\WIN2000\SETUP.EXE
Sound Driver (For AD1881 Audio Codec only)
1. Windows 95：Run X：\CODEC\AD1881\WIN95\SETUP.EXE
2. Windows 98/98SE：Run X：\CODEC\ AD1881\WIN98\SETUP.EXE
3. Windows NT 4.0：Run X：\CODEC\ AD1881\WINNT\SETUP.EXE
4. Windows 2000：Run X：\CODEC\ AD1881\WIN2000\SETUP.EXE
PC Health Software
Windows 95：Run X：\INTEL810\HEALTH4\SETUP.EXE
Windows 98：Run X：\INTEL810\HEALTH4\SETUP.EXE
NOTES 1. For Windows 95 user ： You must run SETUP.EXE twice in order to complete this
installation. The computer will install device identification at first time when you run
SETUP.EXE. When you finish, you need re-start your computer manually and run
SETUP.EXE once again to install correspond driver.
2. Please follow on screen instruction to complete your installation.
3. Please refer to HELP for Windows 95/98 relate questions.
4-2 Keyboard Password/Hot-key / PS/2 Mouse Power On
This Mother board has two ways to Power On System, one is use power button the other is use
keyboard. This document description how to use keyboard to control Power On function.
Function 1:
Use Power Button Power On.
Please setting both JP6 2-3closed (see Figure A). In this condition the system will ignore the
BIOS SETUP "Power On Function" under "INTEGRATED PERIPERALS", system only can
power on by Power Button.
Function 2:
Use Keyboard Password/ Hot-key /PS/2 Mouse Power On (Default setting).
You have to setting both JP6 1-2 closed (see Figure A). In this setting you can change BIOS
SETUP to "Password" or "Hot-key" "PS/2 Mouse" in "Power On Function" item under
"INTEGRATED PERIPHERAL SETUP".
A: When choose "Password", then user can setting your password in "KB Power On
Password" item. After save CMOS SETUP, the next time want to power on, you have to key
42