Table of Contents
Advertisement
15. ATX Power button/ Soft Power button: JP9
When using ATX power, the system power can be controlled by a momentary
switch connected to JP9 Pushing the button once will switch the system
between ON and SLEEP. Pushing the switch while in the ON mode more than
4 seconds will turn the system off. The system Power LED shows the status of
the system's power.
16. VGA connector: J13
This connector supports the provided VGA cable with mounting bracket.
Connect the ribbon cable to connector and mount the bracket to the case on
an open slot .
17. Video Feature connector: J12
Orient the red stripe on the
monitor cable with Pin 1
J13
1
2
15
16
VGA Connector
J12
14
1
26
13
Video Feature Connector
18
Advertisement
Table of Contents
