12. IR infrared module connector: J15
This connector supports the optional wireless transmitting and receiving
infrared module. This module mounts to small opening on system cases that
support this feature you must also configure the setting through BIOS setup.
Use the five pins as shown on the Back View and connect a ribbon cable from
the module to the motherboard according to the pin definitions.
13. USB Port connector: USB0 (J4)/ USB1 (J5)
14. CPU FAN connector: J14
J15
VCC
N.C
IRRX
GND
IRTX
Infrared Module Connector
J14
3
1
+12V
R.P.M. SENCE
GND
CPU Fan Connector
17