Table of Contents
Advertisement
4. PS/2 Mouse Connector (6-pins block): J6
If you are using a PS/2 mouse, you must purchase an optional PS/2 mouse set
which connects to the 6-pins block and mounts to an open slot on your
computer's case.
5. Parallel Printer Connector (26-pins Block): LPT
Connection for the enclosed parallel port ribbon cable with mounting bracket.
Connect the ribbon cable to this connection and mount the bracket to the case
on an open slot. It will then be available for a parallel printer cable.
NOTE: Serial printers must be connected to the serial port. You can enable the parallel port and
choose the IRQ through BIOS Setup.
Keyboard Connector (5-pins female)
Connector Plug from Keyboard
1:
DATA
2:
NC
3:
GND
4:
VCC
5:
CLK
6:
NC
13
Advertisement
Table of Contents
