MSI TX98 Manual page 18

10. IDE activity LED: JP8
This connector connects to the hard disk activity indicator light on the case.
11. Front Panel connector: This 16-pins connector to connect to case front panel
switch.
A. Turbo LED switch: TBLED
The motherboard's turbo function is always on. The turbo LED will remain
constantly lit while the system power is on. You may also to connect the
Power LED from the system case to this lead. See the figure below.
B. Reset switch lead: RESET
This 2-pin connector connects to the case-mounted reset switch for
rebooting your computer without having to turn off your power switch. This
is a preferred method of rebooting in order to prolong the life of the system's
power supply. See the figure below.
C. Keyboard lock switch lead & Power LED: KEYLOCK & PW
This 5-pin connector connects to the case-mounted key switch for locking
the keyboard for security purposes and Power LED together.
D. Speaker connector: SPEAKER
This 4-pin connector connects to the case-mounted speaker. See the figure
below.
JP8
3 +
-
1
IDE (Hard Drive) LED
VCC
Speaker GND
NC
Reset SW
GND
Turbo LED
GND
System Case Connections
16
GND Keyboard
Lock
GND
Power LED/
NC
ACPI LED
VCC
GND
Turbo SW/
SMI
VCC