MSI TX98 Manual page 16

6. Serial port COMA and COMB Connector (Two 10-pins blocks): COM1, COM2
These connectors support the provided serial port ribbon cables with mounting
bracket. Connect the ribbon cables to these connectors and mount the bracket
to the case on an open slot. The two serial ports on th e mounting bracket will
then be used for pointing devices or other serial devices.
configuration of "Onboard Serial Port"
7. Floppy drive Connector (34-pins block): FDD
This connector supports the provided floppy drive ribbon cable. After connecting
the single plug end to motherboard, connect the two plugs at other end to the
floppy drives.
LPT
Parallel Printer Connector
FDD
Floppy Drive Connector
14
Pin 1
See
Pin 1
BIOS