MSI TX98 Manual page 11

4. CMOS RAM Clear: JP1 (Yellow color selector)
WARNING: Make sure your computer is POWER OFF when you CLEAR CMOS.
Connect a jumper Cap over this jumper for a few seconds, will clears information
stored in the CMOS RAM Chip that input by user, such as hard disk information
and passwords. After CLEAR CMOS, you must enter the BIOS setup (by
holding down <DEL> during power-up) to re-enter BIOS information (see BIOS
SETUP).
Selections
Normal
Clear CMOS
JP1
1-2 (Default)
2-3 (momentarily)
9