Shutting Down The Ir C2100/2100S; Restarting The Ir C2100/2100S - Canon IR C2100 Job Management Manual

1
1-9 Rebooting, shutting down, and restarting the iR C2100/2100S

Shutting down the iR C2100/2100S

You may need to shut down the iR C2100/2100S for service. When you do
so, fonts that have been downloaded to the hard disk drive are not deleted.
Print jobs in the Hold queue, the Printed queue, and jobs that have been
processed but not printed are not deleted; they will be available for printing
when you restart the iR C2100/2100S.
To shut down the iR C2100/2100S, first make sure no jobs are being
processed or printed (the Data activity light should be off ). Then turn off the
copier/printer using the main power switch.
After turning the copier/printer off, wait at least three seconds before
N :
OTE
turning it back on.

Restarting the iR C2100/2100S

To restart the iR C2100/2100S, move the main power switch on the
copier/printer to the On position, then press the Control Panel power switch,
if necessary. Wait approximately three seconds, and press the OPTIONS key.
You are still able to print to the iR C2100/2100S even if the Control
N :
OTE
Panel power switch is turned off.
If you do not press the OPTIONS key, the copier/printer continues with
startup, for the copier/printer only, and the COPY light turns on. When
copier/printer startup is complete, the copier/printer main screen appears on
the Touch Panel Display.
If an error occurs during startup, the Error activity light flashes orange.
Check the Touch Panel Display for details of the error.
Main power switch:
Press up to power on
Press down to power off