Canon IR C2100 Job Management Manual page 52

2
2-26 Introduction to the Command WorkStation
At any given time, the Job Log includes only those jobs processed or printed
since the Job Log was last cleared. The Job Log can be cleared manually by
choosing "Clear Job Log" from the Server menu or automatically if the
administrator has enabled autoclearing of the Job Log in Setup. The Job Log
is also cleared by choosing Clear Server on the iR C2100/2100S Control
Panel (see page 1-10) or by using the Clear command from the Command
WorkStation (see page 2-10).
You can adjust the column widths in the Job Log display by clicking the
column border in the heading and dragging left or right. For more
information, see Chapter 3.
When you open the Job Log, you can choose to display all jobs in the current
Job Log or only the jobs in a specified date range. By default, all jobs are
displayed. To specify a date range, choose Filter from the Window menu,
click Range, and enter dates in the From and To fields; or, click the calendar
icons next to the From and To fields and select dates by clicking them in the
calendars. Use the arrows at the upper corners of the calendars to display
different months.
In the Job Log window, "Start Time" reflects the time that the job
N :
OTE
began RIPping; "End Time" reflects the time that the job printed; and
"Process Time" reflects the total RIP time for the job. These times do not
correspond to the Date/Time values displayed in the Queues window.
To update the Job Log window display after
Updating the Job Log display
specifying a date range (or at any other time), choose Refresh from the
Window menu.