Canon IR C2100 Job Management Manual page 108

A
A-2 Troubleshooting
iR C2100/2100S
message:
Disk full
Drum Service Required
Drum Warning
Face Down Unit Open
Finisher Lower Front
Cover Open
Finisher Lower Left
Cover Open
Finisher Right Cover
Open
Finisher Upper Cover
Open
Front Cover Open
Fuser Unit Cover Open
Left Cover Open
Load Heavy ___ paper
Load Plain___paper
Load Special___paper
Load___Transparency
paper
Lower Right Cover
Open
No Control Card
Corrective action/additional information:
The iR C2100/2100S disk is almost full. In this state, a new job
can only be printed when the oldest printed job is deleted. This is
not an efficient way to print, and may lead to delays and printing
errors, so you should delete unneeded jobs from the Hold areas in
the Queues window (yellow job rows) and held jobs in the Archive
window. Also delete unneeded fonts. If these do not work, you can
Clear Server
use the command.
Call for service.
There is a problem with the drum. If the problem persists, call for
service.
Close the Face Down unit.
Close the lower front cover.
Close the finisher lower left cover.
Close the finisher right cover.
Close the finisher upper cover.
Close the front cover.
Close fuser unit cover.
Close left cover.
The paper specified is not loaded. The iR C2100/2100S will print
when the tray is loaded with the required paper.
The paper specified is not loaded. The iR C2100/2100S will print
when the tray is loaded with the required paper.
The paper specified is not loaded. The iR C2100/2100S will print
when the tray is loaded with the required paper.
The paper specified is not loaded. The iR C2100/2100S will print
when the tray is loaded with the required paper.
Close lower right cover.
If an optional card reader is installed, insert the control card to use
the copier/printer.