Combine Color Separations; Spot Color Matching - Canon IMAGERUNNER C2550 Printer Manual

Combine Color Separations

3

Spot Color Matching

3-74
PS Settings
On, Off *
This setting specifies whether to combine and print separation data created by
application software on one page. The combined data is printed in color so you
can check overprinting or the final color finish.
If [On] is selected, the separated data is combined and printed on one page using
all four (CMYK) toners.
If [Off] is selected, the separated data is not combined and each separation is
printed using the black (K) toner only.
IMPORTANT
This function is available only for separated data with DSC (Document Structuring
Convention) comments that has CMYK color specified.
NOTE
This function is only available if 'Color Mode' is set to [Auto Detect] or [Full Color].
•
This function is not available with data separated using Photoshop.
•
Overprinting is the term for colors overlapping when they are printed.
•
On, Off
*
This setting enables you to specify the optimum method of reproducing Spot
Colors.
Using a named color profile, you can print converting to the device-independent
color matching the spot color.
NOTE
For more information on obtaining the NetSpot Resource Downloader, consult your
•
local authorized Canon dealer.
This setting is invalid even when set to [On], as named color profiles are not
•
preinstalled as the default. Before applying this setting, download any necessary
named color profiles to this machine.