Printing Directly Using The Command Prompt - Canon IMAGERUNNER C2550 Printer Manual
Ps/pcl/ufr ii printer guide
Hide thumbs
Also See for IMAGERUNNER C2550:
- Network manual (234 pages) ,
- Brochure & specs (16 pages) ,
- Specifications (3 pages)
Table of Contents
Advertisement
Printing Directly Using the Command Prompt
You can print directly by entering the LPR command in the command prompt.
You can also set the direct printing settings from the touch panel display when you
send data to this machine for direct printing via the LPR command prompt or the
Remote UI.
Specifies from the command prompt
•
You can specify LPR command settings with the P option, where each item is
separated with an underscore ( _ ). The following commands are supported with
this machine.
5
Paper Size
Layout
Copies
Command example (with Paper Size as "LETTER," Layout as "DUPL," and Copies
as "20"):
Input Example : lpr -S <IP Address> -P LETTER_DUPL_C20 <file name>
NOTE
If settings have not been specified from the command prompt, settings in the touch panel
display will be enabled.
5-38
Printing Directly Using the Command Prompt
Item
LETTER, LEGAL, LEDGER (11" x 17"), A3, A4, A5, B4, B5
SIMP (One-sided), DUPL (Two-sided/Long Edge),
DUPS (Two-sided/Short Edge)
C<Number of copies>.
Command
Advertisement
Table of Contents
