Punch - Canon IMAGERUNNER C2550 Printer Manual
Ps/pcl/ufr ii printer guide
Hide thumbs
Also See for IMAGERUNNER C2550:
- Network manual (234 pages) ,
- Brochure & specs (16 pages) ,
- Specifications (3 pages)
Table of Contents
Advertisement
3
Punch
3-34
Settings Menu
The table below represents the maximum number of sheets that can be stapled.
•
Finisher-Z1, Finisher-Y1/Saddle Finisher-Y2
Paper Size
17 to 21 lb bond (64 to 80 g/m
LTR, EXEC,
21 to 28 lb bond (81 to 105 g/m
A4, B5
28 lb bond to 60 lb cover (106 to 163 g/m
17 to 21 lb bond (64 to 80 g/m
LGL, LTRR,
11" x 17", A3,
21 to 28 lb bond (81 to 105 g/m
B4, A4R
28 lb bond to 60 lb cover (106 to 163 g/m
If the number of sheets exceeds these limits, they will not be stapled.
•
Make sure to select compatible settings when using Staple and Punch
•
simultaneously. If conflicting settings are selected, such as the staple setting for
the right side of the paper and the punch setting for the left, the machine will use
neither Staple nor Punch.
Off
*
, Top, Bottom, Left, and Right
This setting enables you to specify the desired paper position for holes to be
punched for binding.
NOTE
This function is only available for selection if the optional Puncher Unit-M1 is
•
attached to the optional Finisher-Y1 or Saddle Finisher-Y2. The optional Puncher
Unit-M1, Finisher-Y1, and Saddle Finisher-Y2 are not available for the Color
imageRUNNER C2550.
The table below represents the paper sizes that can be punched with the puncher
•
unit.
Puncher Type
Puncher Unit-M1
Make sure to select compatible settings when using Staple and Punch
•
simultaneously. If conflicting settings are selected, such as the staple setting for
the right side of the paper and the punch setting for the left, the machine will use
neither Staple nor Punch.
Holes cannot be punched in Transparency, Pre-punched, Tracing paper, Labels,
•
and Envelope.
Paper Type
Holes
2
LGL, LTRR
3
11" x 17", LTR, A3, A4
Capacity
(Sheets)
2
)
2
)
2
)
2
)
2
)
2
)
Paper Size
50
30
2
30
20
2
Advertisement
Table of Contents
