Belkin F6D6230XX4 User Manual page 77

MaNUally CoNfIgURINg NeTWoRK seTTINgs
sections
table of contents
Manually Configuring Network settings in Windows 98 or Me
1�
Right-click on "My Network Neighborhood" and select "Properties"
from the drop-down menu .
2�
Select "TCP/IP -> settings" for your installed network adapter . You
will see the following window
(2)
(1)
Double N+ Wireless Router
1 2 3
(3)
4 5 6
3� If "Specify and IP address" is selected, your Router will need
to be set up for a static IP connection type . Write the address
information in the table below . You will need to enter this
information into the Router .
4�
Write the IP address and subnet mask from the "IP Address" tab
(3) .
5� Click the "Gateway" tab (2) . Write the gateway address down in the
chart .
6� Click the "DNS Configuration" tab (1) . Write the DNS address(es) in
the chart
7� If not already selected, select "Obtain IP address automatically" on
the IP address tab . Click "OK" .
Restart the computer� When the computer restarts, your network
settings are now configured for use with the Router�
75
7 8 9 10