Connecting And Configuring Your Router - Belkin F6D6230XX4 User Manual

CoNNeCTINg aND CoNfIgURINg yoUR RoUTeR

sections
table of contents
step 1: Hardware Connections
WAN
LAN
3
3
1� Find the cable connecting your modem and computer* . Unplug it
from the computer and plug it into the yellow port on the Belkin
Router .
2�
Connect the new cable (provided in the box) to any gray port on
the Router . Plug the other end into a network (Ethernet) port on
your computer .
3� Plug the power supply into a wall outlet, and the other end into the
black port on the Belkin Router . As the Router wakes up, lights will
come on; recheck your connections if the "Wired" and "Router"
lights are not a steady blue after 20 seconds .
4� Rotate the antennas up .
Double N+ Wireless Router
1 2 3
3
2
1
1
4 5 6
4
5� Locate the CD in this guide and insert it into your computer . The
Setup Wizard should appear automatically . If it doesn't, open
the CD in My Computer (Windows) or the Finder (Mac OS X) and
double-click the "Router Setup" icon .
*If you are replacing an existing router, find the cable connecting the modem and old router .
Disconnect it from the old router and plug it into the yellow port on the new router .
12
7 8 9 10