Belkin F6D6230XX4 User Manual page 45

UsINg THe Web-baseD aDVaNCeD UseR INTeRfaCe
sections
table of contents
1� Wi-fi Protected setup (WPs)
Enabled or Disabled .
2� Personal Identification Number (PIN) Method:
In this method, a wireless client wishing to access your network must
supply an 8-digit PIN to the Router . Start the WPS PIN handshaking
procedure from the client, and you will be provided an 8-digit PIN . Enter
it in the box and click "Enroll" .
3� Router PIN
If an external registrar is available, you may enter in the Router's PIN
to the registrar . Click "Generate New PIN" to change the PIN from the
default value . Click "Restore Default PIN" to reset the PIN value .
4� Push button Configuration (PbC) Method
PBC is an alternate method to connect to a WPS network . Push the
PBC button located on the front of the Router for two seconds, and
then initiate WPS PBC on the client device . Alternatively, push the "Start
PBC" soft button to start this process .
5� Manual Configuration Method
This section lists the current security settings to be set up if not using
WPS .
Double N+ Wireless Router
1 2 3 4 5 6
WPa2 Requirements
IMPoRTaNT: In order to use WPA2 security, all your computers and
wireless client adapters must be upgraded with patches, driver, and
client utility software that supported WPA2 . At the time of this User
Manual's publication, a couple security patches are available, for free
download, from Microsoft® . These patches work only with the Windows
XP operating system . Other operating systems are not supported at this
time .
For Windows XP computers that do not have Service Pack 2 (SP2),
a file from Microsoft called "Windows XP Support Patch for Wireless
Protected Access (KB 826942)" is available for free download at
http://support .microsoft .com/kb/826942
For Windows XP with Service Pack 2, Microsoft has released a
free download to update the wireless client components to support
WPA2 (KB971021) . The update is available from: http://support .
microsoft .com/kb/917021
These steps are not necessary for Windows XP SP3 and above .
IMPoRTaNT: You also need to ensure that all your wireless client cards/
adapters support WPA2, and that you have downloaded and installed
the latest driver . Most of the Belkin wireless cards have driver updates
available for download from the Belkin support site: www .belkin .com/
networking .
43
7 8 9 10